I'm trying to backup my files to a ftp folder with the below settings:
- source folder: local folder
- target folder: ftp folder
- "backup" sync mode
- "include subfolders" checked
- compare by content
- "use lower case file names" NOT checked
The initial sync would work fine, but subsequent sync would show the subfolders on the target folder being marked for deletion and ALL files in the target subfolders as different from the source folder. This does not occur on the released version.
Subfolders marked for deletion in "backup" mode
Target Directory (from FTP Log)
>> LIST
<< 150 Opening ASCII mode data connection for /bin/ls.
<< 03-15-07 09:01AM 71680 Load Runner CUT.ppt
<< 03-15-07 09:01AM 59392 Load Runner Front Panel Test.ppt
<< 03-15-07 09:01AM 2009088 Load Runner FT.doc
<< 03-15-07 09:01AM 1804288 Load Runner Mainframe FT.ppt
<< 03-15-07 09:01AM 5795840 Load Runner Mainframe QC.ppt
<< 03-15-07 09:01AM 1573376 Load Runner Module Aging.ppt
<< 03-15-07 09:01AM 1996800 Load Runner Module Init.ppt
<< 03-15-07 09:01AM 1332736 Load Runner Process Flow.ppt
<< 03-15-07 09:01AM 2877440 Load Runner QC and Button Up.ppt
<< 03-15-07 09:01AM 1817002 Load Runner Service Manual.pdf
<< 03-15-07 09:01AM <DIR> More Test
<< 03-15-07 09:01AM 477058 N3300A -N3307A dc Electronic Loads Data Sheet.pdf
<< 03-15-07 09:01AM 784901 N3300A -N3307A dc Electronic Loads Programming Guide.pdf
<< 03-15-07 09:01AM 1001382 N3300A, - N3307A DC Electronic Loads User's Guide.pdf
<< 03-15-07 09:01AM <DIR> Test
<< 226 Transfer complete.
Local Directory
03/13/2007 06:18 PM <DIR> .
03/13/2007 06:18 PM <DIR> ..
01/24/2007 10:32 AM 71,680 Load Runner CUT.ppt
01/09/2007 03:50 PM 59,392 Load Runner Front Panel Test.ppt
01/24/2007 09:57 AM 2,009,088 Load Runner FT.doc
01/09/2007 03:50 PM 1,804,288 Load Runner Mainframe FT.ppt
01/09/2007 08:57 PM 5,795,840 Load Runner Mainframe QC.ppt
01/24/2007 10:01 AM 1,573,376 Load Runner Module Aging.ppt
01/24/2007 11:02 AM 1,996,800 Load Runner Module Init.ppt
01/24/2007 09:57 AM 1,332,736 Load Runner Process Flow.ppt
01/24/2007 10:32 AM 2,877,440 Load Runner QC and Button Up.ppt
02/27/2007 11:06 AM 1,817,002 Load Runner Service Manual.pdf
03/13/2007 06:18 PM <DIR> More Test
02/23/2007 10:37 AM 477,058 N3300A -N3307A dc Electronic Loads Data Sheet.pdf
02/26/2007 02:40 PM 784,901 N3300A -N3307A dc Electronic Loads Programming Guide.pdf
02/23/2007 10:38 AM 1,001,382 N3300A, - N3307A DC Electronic Loads User's Guide.pdf
03/13/2007 06:18 PM <DIR> Test
13 File(s) 21,600,983 bytes
4 Dir(s) 55,091,933,184 bytes free
Directory of C:\7. Load Runner\Test
03/13/2007 06:18 PM <DIR> .
03/13/2007 06:18 PM <DIR> ..
01/09/2007 08:26 PM 252,928 Load Runner MF Aging.doc
01/24/2007 09:12 AM 528,384 Load Runner MF Hipot.doc
01/24/2007 09:12 AM 1,524,736 Load Runner SL Hipot.doc
3 File(s) 2,306,048 bytes
2 Dir(s) 55,085,535,232 bytes free
Directory of C:\7. Load Runner\More Test
03/13/2007 06:18 PM <DIR> .
03/13/2007 06:18 PM <DIR> ..
01/24/2007 09:17 AM 4,104,704 Load Runner SL Aging.ppt
01/24/2007 09:56 AM 4,057,600 Load Runner SL Init.ppt
2 File(s) 8,162,304 bytes
2 Dir(s) 55,085,535,232 bytes free
As you can see, they're in the same case and the subfolders are of the same name. I also noticed that in the FTP log, it doesn't list the subfolders content. As I've mentioned, this doesn't happen in the released version.
>> LIST
<< 150 Opening ASCII mode data connection for /bin/ls.
<< 03-15-07 09:01AM 71680 Load Runner CUT.ppt
<< 03-15-07 09:01AM 59392 Load Runner Front Panel Test.ppt
<< 03-15-07 09:01AM 2009088 Load Runner FT.doc
<< 03-15-07 09:01AM 1804288 Load Runner Mainframe FT.ppt
<< 03-15-07 09:01AM 5795840 Load Runner Mainframe QC.ppt
<< 03-15-07 09:01AM 1573376 Load Runner Module Aging.ppt
<< 03-15-07 09:01AM 1996800 Load Runner Module Init.ppt
<< 03-15-07 09:01AM 1332736 Load Runner Process Flow.ppt
<< 03-15-07 09:01AM 2877440 Load Runner QC and Button Up.ppt
<< 03-15-07 09:01AM 1817002 Load Runner Service Manual.pdf
<< 03-15-07 09:01AM <DIR> More Test
<< 03-15-07 09:01AM 477058 N3300A -N3307A dc Electronic Loads Data Sheet.pdf
<< 03-15-07 09:01AM 784901 N3300A -N3307A dc Electronic Loads Programming Guide.pdf
<< 03-15-07 09:01AM 1001382 N3300A, - N3307A DC Electronic Loads User's Guide.pdf
<< 03-15-07 09:01AM <DIR> Test
<< 226 Transfer complete.
Local Directory
03/13/2007 06:18 PM <DIR> .
03/13/2007 06:18 PM <DIR> ..
01/24/2007 10:32 AM 71,680 Load Runner CUT.ppt
01/09/2007 03:50 PM 59,392 Load Runner Front Panel Test.ppt
01/24/2007 09:57 AM 2,009,088 Load Runner FT.doc
01/09/2007 03:50 PM 1,804,288 Load Runner Mainframe FT.ppt
01/09/2007 08:57 PM 5,795,840 Load Runner Mainframe QC.ppt
01/24/2007 10:01 AM 1,573,376 Load Runner Module Aging.ppt
01/24/2007 11:02 AM 1,996,800 Load Runner Module Init.ppt
01/24/2007 09:57 AM 1,332,736 Load Runner Process Flow.ppt
01/24/2007 10:32 AM 2,877,440 Load Runner QC and Button Up.ppt
02/27/2007 11:06 AM 1,817,002 Load Runner Service Manual.pdf
03/13/2007 06:18 PM <DIR> More Test
02/23/2007 10:37 AM 477,058 N3300A -N3307A dc Electronic Loads Data Sheet.pdf
02/26/2007 02:40 PM 784,901 N3300A -N3307A dc Electronic Loads Programming Guide.pdf
02/23/2007 10:38 AM 1,001,382 N3300A, - N3307A DC Electronic Loads User's Guide.pdf
03/13/2007 06:18 PM <DIR> Test
13 File(s) 21,600,983 bytes
4 Dir(s) 55,091,933,184 bytes free
Directory of C:\7. Load Runner\Test
03/13/2007 06:18 PM <DIR> .
03/13/2007 06:18 PM <DIR> ..
01/09/2007 08:26 PM 252,928 Load Runner MF Aging.doc
01/24/2007 09:12 AM 528,384 Load Runner MF Hipot.doc
01/24/2007 09:12 AM 1,524,736 Load Runner SL Hipot.doc
3 File(s) 2,306,048 bytes
2 Dir(s) 55,085,535,232 bytes free
Directory of C:\7. Load Runner\More Test
03/13/2007 06:18 PM <DIR> .
03/13/2007 06:18 PM <DIR> ..
01/24/2007 09:17 AM 4,104,704 Load Runner SL Aging.ppt
01/24/2007 09:56 AM 4,057,600 Load Runner SL Init.ppt
2 File(s) 8,162,304 bytes
2 Dir(s) 55,085,535,232 bytes free
As you can see, they're in the same case and the subfolders are of the same name. I also noticed that in the FTP log, it doesn't list the subfolders content. As I've mentioned, this doesn't happen in the released version.